CAN Lite Carbon Filter 3000m³/hr – 1m – 200mm (8″)

High-Capacity Odour Control for Large Ventilation Systems

The CAN Lite Carbon Filter 3000m³/hr – 1m – 200mm (8″) is a high-capacity air filtration solution designed to effectively remove unwanted odours from large grow rooms and commercial ventilation systems. Built using high-quality activated carbon, this filter captures airborne particles and odour molecules as air passes through the carbon bed, ensuring that exhausted air leaving the grow space is clean and neutral.

Part of the well-known CAN Lite range, this model offers the same reliable odour filtration performance as heavier carbon filters but with a lighter-weight construction that makes installation and handling easier. With a maximum airflow capacity of 3000m³/hr, it is suitable for powerful extraction systems used in larger grow environments.

The 200mm (8″) flange connection ensures compatibility with high-capacity inline fans and large ducting setups, making it an ideal component for serious ventilation systems that need dependable odour management.

Key Features:

• Maximum Airflow: 3000m³/hr

• Flange Size: 200mm (8″) connection for large extraction systems

• Filter Length: 1 metre for increased carbon contact time

• Activated Carbon Filtration: Efficient removal of odours and airborne contaminants

• Lightweight CAN Lite Design: Easier to handle and install than traditional heavy filters

• High Surface Area: Ensures effective air purification even at higher airflow rates

• Compatibility: Suitable for use with large inline extraction fans and ducting systems

What the Package Contains:

• 1 × CAN Lite Carbon Filter 3000m³/hr – 1m – 200mm (8″)

• Pre-installed 200mm flange connection

• Pre-filter sleeve (white dust cover) to protect the carbon from debris

How to Use the Product & Best Usage Recommendations

Installation

The carbon filter is typically installed at the start of the extraction system inside the grow room, allowing air to be filtered before it passes through ducting and the extraction fan. Connect the filter directly to a compatible 200mm inline fan or attach it using short ducting and secure clamps.

For optimal airflow efficiency:

• Ensure the fan capacity matches or slightly exceeds the filter’s airflow rating

• Keep ducting runs as short and straight as possible

• Mount the filter securely using ceiling straps or brackets

Maintenance

The included pre-filter sleeve helps prevent dust and particles from clogging the carbon bed. This sleeve should be cleaned or replaced periodically to maintain airflow efficiency.

Over time, activated carbon naturally becomes saturated. Depending on environmental conditions and usage intensity, carbon filters typically last around 12–24 months before replacement is recommended.

Best Usage Recommendations

• Ideal for large grow rooms or commercial environments

• Pair with high-power EC or AC extraction fans

• Maintain proper negative pressure in the grow space to ensure all outgoing air passes through the filter

• Avoid excessively humid environments, as high humidity can reduce carbon efficiency

When properly matched with the correct fan and maintained regularly, the CAN Lite filter provides reliable and consistent odour control throughout the growing cycle.