The ONA-Air Block Odour Control Fitting will help to kill any unwanted grow room smells stone dead. Just fit it inside your extraction system and it will act as an extra layer of protection - any air that passes through will then be infused with the pleasing scent of ONA odour neutraliser. Note that ONA Blocks are available separately.
ONA – Superb, long-lasting & totally reliable odour control
Treats air as it's removed from your grow area
Ultra efficient delivery system for ONA's odour destroying products
ONA-Air Blocks are purchased separately and available in four aromas: Pro, Fresh Linen, Apple Crumble and Tropics
Sturdy, lightweight steel unit
Available in a range of different sizes: 4, inch, 5 inch, 6 inch, 8 inch, 10 inch and 12 inch
1 x ONA-Air Odour Control System (choose your size above)
How the ONA-Air Odour Control Duct Kit Works
This ducting attachment consists of a cylindrical steel unit with an internally mounted wire-mesh housing for containing (separately purchased) ONA Blocks, which are conveniently accessed using a lid and catch (no need to remove it very time you want to change the block!). The design allows air passing through your extraction system to be fully treated before it reaches its exhaust point.
It's available in a range of sizes and can easily be incorporated into any setup.
How to use the ONA-Air Odour Control Duct Kit
Although highly effective in its own right, the ONA-Air Odour Control Duct Kit is NOT to be used as a replacement for a quality carbon filter; rather, it makes the perfect accompaniment to traditional odour control solutions. We recommend using this product with a suitably sized Rhino Filter for optimal results and 100% complete protection.
The ONA-Air Odour Control Duct Kit is designed to fit directly into the ducting of your extraction system. Please ensure that the unit is positioned AFTER your carbon filter and extractor fan. This can be done easily by turning off your extractor, removing a small section of ducting and positioning the ONA-Air Odour Control Ducting Attachment within the gap, making sure that the unit is properly supported – this can be done using Rope Ratchets, chains or Easy Rolls, or by supporting it from its underbelly. Re-attach the ducting to each side using gaffer tape or a jubilee clip. Open both of the catches located next to the lid at the top of the ducting attachment, unscrew and remove the top from your ONA Block and drop it into the wire mesh housing, then close the lid of the attachment and re-apply the two catches to form a sealed unit. Then, all that's left to do is to turn your extraction back on at the mains supply and enjoy an odour free environment.
The manufacturer recommends that ONA-Air Blocks can be stacked in the wire mesh housing for extra protection at up to three jars in height, dependent on the size of your chosen kit. When stacked in the housing, the jars' openings can get covered by the underside of the jar sitting above it. For this reason, we recommend that you insert a cocktail stick or something similar into the body of the ONA-Air Blocks to create gaps between each one and increase airflow around the jars' openings.